Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Multimedia System in the Peugeot 2008?

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Car stereo

As shown in this tutorial, replacing the multimedia system in the Peugeot 2008 is an extremely simple and quick operation. Before doing this, ensure that the key is not inserted to avoid causing damage. Start by prising off the rear cover of the system using a plastic spatula, then unscrew the two securing screws that are now exposed. Next, lever along the joint of the radio with the spatula, disengage it, and, pulling it towards you, remove it from the housing. Finally, disconnect all the connectors and fit the replacement by following the reverse procedure.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Multimedia System of the Peugeot 2008
How to Reset the Multimedia System of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this video tutorial, you will learn how to reset the multimedia system and radio from the central display of the Peugeot 2008 in simple and quick …
Peugeot 2008 2020 Multimedia System/Radio Information
Peugeot 2008 2020 Multimedia System/Radio Information
Peugeot 2008 (2019-2026 / MK 2) In this video, we will look at the guide for the new infotainment system and radio in the second generation Peugeot 2008. Get inside the car and pres…
How to Connect Your Smartphone to the Peugeot 2008 Multimedia System
How to Connect Your Smartphone to the Peugeot 2008 Multimedia System
Peugeot 2008 (2019-2026 / MK 2) Here are the instructions to connect your smartphone to the multimedia system of the Peugeot 2008 in simple steps. First, get into the vehicle and tu…

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - What to do when the Peugeot 2008 screen does not turn on? Read answer

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos