Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change on a Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

Learn how to perform an oil change on a Peugeot Boxer. The first step is to open the oil cap on top, then place a container underneath the sump to collect the oil. Using the appropriate tool, remove the oil filter.

Some oil will also come out from there, which you should collect in the container. The used oil must be disposed of at a designated collection centre.

Also, change the filter by lubricating the seal with a bit of oil. Replace the cap on the sump, possibly changing the seal on the cap. Then pour oil into the upper container until it is full. Change the air filter by removing the four screws holding the cover, cleaning the container thoroughly, and replacing the filter.

Refit the screws. Also, change the cabin filter, which is located behind the glove compartment that you will need to remove.

There are four screws to remove here as well, then take off the cover and pull the filter from its housing. Clean the container with a blast of compressed air and refit the new filter.

Refit the four screws and replace the glove compartment. Job done.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Peugeot Boxer.
How to Reset the Oil Change Light on a Peugeot Boxer.
Peugeot Boxer (1993-2006 / MK 1) When resetting the oil change light on a commercial vehicle like the Peugeot Boxer, always prioritise your safety and that of others. Therefore, rese…
How to Reset the Oil Change Light on a Peugeot Boxer?
How to Reset the Oil Change Light on a Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To reset the Oil Change light on a Peugeot Boxer, turn the ignition key to the 'on' position and check that the light appears on the dashboard. Then,…
How to reset the oil light on the Peugeot Boxer
How to reset the oil light on the Peugeot Boxer
Peugeot Boxer (1993-2006 / MK 1) If you own a first-generation Peugeot Boxer and the oil warning light on the instrument panel continues to stay on even after replacing the oil, do n…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos