Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Automatic Gearbox Oil of the Peugeot 308?

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Transmission fluid

See other generations:
Video tutorial

To replace the automatic gearbox oil of the Peugeot 308, lift the car so that you can loosen the bolts securing the undertray at the bottom of the vehicle. Once this undertray is completely removed, open the oil drain plug and let it flow completely into a suitably placed container.

After the oil has fully drained, close the plug and reposition the undertray; then, open the bonnet and remove the air filter housing to top up with new oil from the breather located under the filter housing.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Oil Change for Automatic Gearbox on Peugeot 308
Oil Change for Automatic Gearbox on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To perform this operation on an automatic gearbox, unlike a manual gearbox, you need the appropriate machinery. If you do not have it and do not wish…
How do you reset the automatic gearbox of the Peugeot 308?
How do you reset the automatic gearbox of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) In order to reset the automatic gearbox on the Peugeot 308, it is necessary to turn on the instrument panel by turning the key inside the ignition sw…
How to reset the automatic gearbox on the Peugeot 308
How to reset the automatic gearbox on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) In this video, it is shown how to restore the automatic gearbox, specifically the gearbox control software on the Peugeot 308. This procedure is simp…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos