Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to reset the automatic gearbox on the Peugeot 308

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 1, T7 - Years 2007-2014
Part: Gearbox
Operation: How to reset the automatic gearbox on the Peugeot 308

In this video, it is shown how to reset the automatic transmission, specifically the transmission control software on the Peugeot 308. This procedure is simple and does not require any special tools or software, but it will take 3 minutes to complete. To reset the automatic transmission, you need to turn on the instrument panel without starting the engine, make sure all windows are closed, and the radio and air conditioning are turned off. Now, while holding down the brake, shift the transmission to N and leave it in N while holding the brake for 2 minutes. After 2 minutes, while still holding the brake pedal, shift the transmission to D and wait for 1 minute. At the end of the minute, shift the transmission to P, turn off the instrument panel, open and close the door, and restart the instrument panel. At this point, the procedure will be complete.


Posted on 14 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 308 2013-2021 - What problems can give a Peugeot automatic transmission? Read Answer
    • 308 2013-2021 - How to troubleshoot the Peugeot 308 automatic gearbox? Read Answer

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos