Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Disassembly of the steering column joint

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Steering wheel
Operation: Disassembly of the steering column joint

The steering wheel is connected to the steering box by means of a shaft (generally of the telescopic type) equipped with two cardan joints at both ends; to be able to disassemble it, first remove the safety tab at the base of the cardan joint connected to the pinion of the steering box; once the tab has been removed, disassemble the fastening pin of the joint itself and remove it from its seat by sliding it backwards; once the joint has been extracted, take care not to spin the steering wheel in an empty position as this could damage the airbag belt. Then proceed backwards to install by inserting the joint, tightening the pin and finally applying the safety tab.


Posted on 14 August 2023 by ScegliAuto



Disassembly of the steering column shaft cardan joint
Peugeot 206 (1998-2012 / MK 1) The shaft connecting the steering column to the steering box has a very important safety function: it is in fact of the telescopic type and allows th
How to replace the CV joint of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) The replacement of the constant velocity joint on the semi-shaft requires first of all the disassembly of the semi-shaft itself and then positioning
Interior fan replacement instructions
Peugeot 206 (1998-2012 / MK 1) The passenger compartment fan complete with drive motor is located behind the console of the central tunnel on the driver's side: in order to remove

    Frequently Asked Questions

    • 206 1998-2012 - Where are the horns located on Peugeot 206? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos