Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 807
  6. : How to reset the service light on Peugeot 807 and Lancia Phedra

Peugeot 807 - Video tutorial

Model: Peugeot 807 MK 1 - Years 2002-2014
Part: -board computer
Operation: How to reset the service light on Peugeot 807 and Lancia Phedra

To reset the service warning light it is necessary to proceed as follows, access the passenger compartment and sit in the driver's seat, first of all press the button located on the left of the dashboard, and hold it down, at the same time turn on the ignition and we don't start the engine. At this point a ten second countdown starts, after which it will be possible to release the button and then switch off the ignition. In this way the service warning light will go off and we can check it by turning on the ignition again to verify that the light on the dashboard is actually off.


Posted on 24 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos