Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Peugeot 301

Model: Peugeot 301 MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

Video tutorial

If you need to remove and replace the radio in this vehicle, follow the instructions below and refer to this video. The first step is to sit in the driver's seat and pull to detach the plastic trim that contains the air vents and covers the radio; be careful because there is a connector behind this trim that needs to be disconnected.

Use a screwdriver to remove the screws located on the side of the radio display. At this point, you can extract the radio display by disconnecting the connectors behind it. Then, obtain the specific keys needed to extract the radio and pull them towards you; this will allow the radio body to come out of the slot, and you can fully remove it by disconnecting the connectors behind.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in the Peugeot 301?
How to Replace the Radio in the Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) To replace the radio in the Peugeot 301, pry underneath the trim that surrounds the radio display to detach it from its housing and disconnect the un…
Where is the fuse box of the Peugeot 301 located?
Where is the fuse box of the Peugeot 301 located?
Peugeot 301 (2012-2019 / MK 1) The box containing all the various fuses for your Peugeot 301 is located inside the cabin. To be able to locate it and have easy access to the fuses,…
How to Reset the TPMS Light on the 2015 Peugeot 301
How to Reset the TPMS Light on the 2015 Peugeot 301
Peugeot 301 (2012-2019 / MK 1) The TPMS light plays an important role in signaling any tire pressure losses on your Peugeot 301. Sometimes, due to reading errors, it may turn on mi…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos