Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Checking Car Tyre Pressure

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Tires

Drivers know that the air pressure in tyres must be checked regularly. Faulty tyres are often the result of incorrect air pressure, which can affect safety. The correct tyre pressure is usually specified by the vehicle manufacturer or can be found in the tyre pressure chart. Check the vehicle's tyre pressure regularly to avoid damage caused by low air pressure. When changing tyres, it is advisable to also replace the valves, ensuring that the valve caps are tightly screwed on to prevent dirt and dust from entering.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Location and operation of the tyre repair kit on a Peugeot 508
Location and operation of the tyre repair kit on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) This video shows where the tyre repair kit for the Peugeot 508 is located: it is found in the boot, under the load floor, contained in a box with the…
How to Reset the Tyre Pressure Warning Light on a Peugeot 508
How to Reset the Tyre Pressure Warning Light on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) When you notice that the low tyre pressure warning light has illuminated on the instrument panel of your vehicle, first check the tyre pressures and …
How to Reset the Tyre Pressure Light on a Peugeot 508
How to Reset the Tyre Pressure Light on a Peugeot 508
Peugeot 508 (2018-2026 / MK 2) In this tutorial, you will see how to reset the tyre pressure light on a Peugeot 508, a very simple and quick operation that should only be performed…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos