Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to reset the Urea warning light on the Peugeot 308

Peugeot 308 - Video tutorial

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Diesel filter
Operation: How to reset the Urea warning light on the Peugeot 308

If you find the red Urea warning light when you turn on the instrument panel of your Peugeot 308, it is signaling that there is no Adblue in the tank, therefore it is necessary to refill it as soon as possible. Once you go to the petrol station, you need to open the tank, it is located under the spare wheel, therefore it is located in the rear bonnet, you will therefore need to lift the wheel housing, remove the carpet, unscrew the cap and proceed to refuel of the same. After refueling the vehicle with AdBlue and repositioning the carpet and wheel, you need to turn on the instrument panel to realize that the warning light has been reset.


Posted on 19 May 2023 by ScegliAuto

    Frequently Asked Questions

    • 308 2007-2014 - Where is the Peugeot 308 diesel filter located? Read Answer
    • 308 2007-2014 - Where is the Peugeot 308 diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos