Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Window Switch Repair

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Window switch

Video tutorial

If pressing the buttons on the window switch does not move the windows or they only activate after repeated attempts, there is likely a poor contact issue at the buttons themselves: the controls are activated by closing the circuit through the covering under silicone elements that act as buttons; therefore, disassemble the switch by removing the cap at the bottom to access the fastening screw, remove the frame, and extract the switch by disconnecting the relevant connectors; at this point, use a small screwdriver to open the plastic tabs and separate the two halves of the switch; remove the silicone buttons and clean with contact spray before reassembling everything: if the plastic tabs do not hold well, secure the two halves with insulating tape; proceed in reverse for reassembly.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to Replace the Window Regulator on the Peugeot 406?
How to Replace the Window Regulator on the Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) In this tutorial, you will see how to replace the window regulator on the Peugeot 406, a very simple operation. First, ensure that the key is not ins…
Disassembly of Front Door and Related Components
Disassembly of Front Door and Related Components
Peugeot 406 (1995-2005 / MK 1) To disassemble the door, start by removing the cover that conceals the screw from the handle on the armrest. Unscrew the screw, removing the handle a…
Car Window Switch Replacement
Peugeot 406 (1995-2005 / MK 1) This guide shows you how to easily change the car window switch, saving you a trip to the mechanic and some money. The operation is not very difficul…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos