Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install LED Fog Lights on the Peugeot 207 cc

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fog lights

Video tutorial

This guide shows how to replace the fog lights on the Peugeot 207 cc with LED units. First, open the bonnet.

Once the vehicle is secure, use a trim removal tool to take off the fog light finishing cover. Remove the screws securing the light assembly and take it out; disconnect the electrical connector.

Install the LED control unit in a safe area of the engine bay and route the cables to the fog lights; use the appropriate conversion connectors to link the various parts. Connect the fog light cables to the control unit and secure the light units in place.

Connect the control unit to the battery using the two power cables. Connect the remaining electrical wires as specified in the light assembly manual and perform a light test.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

Removing Fog Lights on Peugeot 207
Removing Fog Lights on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will see how to remove the front fog lights on a Peugeot 207 in simple and quick steps. First, lift the vehicle on the af…
How to replace the fog lights in the Peugeot 207 GT?
How to replace the fog lights in the Peugeot 207 GT?
Peugeot 207 (2006-2015 / MK 1) In this tutorial we can see how to replace the fog lights in the Peugeot 207 GT, an extremely simple and quick operation. First of all, make sure tha…
Replace the Front Fog Light of the Peugeot 207
Replace the Front Fog Light of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this tutorial, you will learn how to remove and replace the front fog light of the Peugeot 207 in simple and quick steps. First, remove the chrome…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos