Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Exhaust

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Exhaust muffler

Video tutorial

The exhaust on this model of car is particularly prone to failure, starting with the failure of the front flexible section (resulting in exhaust gases infiltrating the cabin) and leading to the breakage of the joints between various elements, not to mention damage to the support rubbers.

To replace the exhaust, lift the vehicle on a hydraulic lift, lubricate the junction clamp pins with penetrating spray, and proceed with complete disassembly from front to back.

Start by installing the new front section with a flexible joint, securing it with the appropriate clamp and support bracket. Then complete the installation of the central and rear sections.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on a Peugeot 406
Guide to Replacing the Timing Belt on a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Today's instructions will show you how to remove and replace the timing belt on a Peugeot 406. First, open the vehicle's bonnet and start unscrewing …
Instructions for Replacing Handbrake Cable
Instructions for Replacing Handbrake Cable
Peugeot 406 (1995-2005 / MK 1) To replace the handbrake cable, first remove the central tunnel cover; once the cover is off, disconnect the cable from the handbrake lever and pass …
Replacing Dashboard Light Bulbs
Replacing Dashboard Light Bulbs
Peugeot 406 (1995-2005 / MK 1) Replacing the backlighting lights of the climate control display is very simple. Using a small flathead screwdriver, detach the caps located on the s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos