Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the cabin filter on a Peugeot 208

Model: Peugeot 208 UB, UJ, UP, MK 2, UW - Years 2019-2026
Part: Cabin air filter

The cabin air filter on a Peugeot 208 ensures a constant flow of clean air; to maintain this, it should be replaced at the intervals specified in the owner's manual, more frequently if driving on particularly dusty roads. To do this, position yourself on the front passenger side, remove the panel under the dashboard and the central tunnel trim to take off the panel by removing the push pins near the engine compartment bulkhead. Next to this, you will find the cover of the filter box, which you will open by acting on the clips, remove the old filter by pulling the two tabs, insert the new filter element, and close the cover.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the cabin filter of the Peugeot 208?
How do you replace the cabin filter of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) It will be possible to replace the cabin filter of the Peugeot 208 by opening the hood, so that access can be gained to the panel located at the base…
How to Replace the Cabin Filter on a Peugeot 208
How to Replace the Cabin Filter on a Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) In this mini guide dedicated to your Peugeot 208 second generation (2019 model year), discover how to replace the cabin air filter. Contrary to what …
How to replace the cabin air filter of the Peugeot 208
How to replace the cabin air filter of the Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) Replacing the cabin air filter in your second-generation Peugeot 208 is very simple. To complete the operation, you must read the following guide and…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos