Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Door Stay Repair Instructions

Model: Peugeot 607 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

Video tutorial

If the door tends to close by itself when opened, there is a problem with the stay, due either to damage to the stay itself or its housing on the door: the portion of metal where the stay is fixed has given way; therefore, you need to remove the stay and apply a reinforcement plate, but to do this, you must remove the door panel; remove the frame around the window switch and the switch itself, the one around the opening handle, detach the courtesy light and the pressure clips along the edge of the panel; at this point, peel back the soundproofing cover and unscrew the fastening nuts of the stay to apply the reinforcement plate or washers; then proceed in reverse for reassembly.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Instructions for Repairing the Window Regulator Mechanism
Instructions for Repairing the Window Regulator Mechanism
Peugeot 607 (2000-2010 / MK 1) If activating the window switch causes the motor to run but the glass does not move, it means the plastic claws that pull the glass during the up and…
Removing the Window Glass of the Peugeot 607
Removing the Window Glass of the Peugeot 607
Peugeot 607 (2000-2010 / MK 1) Remove the window glass? Start by removing the panel to access the window. Use a trim tool to detach the plastic cover above the internal handle. Wit…
What is the Fuse Diagram for the Peugeot 607?
What is the Fuse Diagram for the Peugeot 607?
Peugeot 607 (2000-2010 / MK 1) In this video, you can see where the fuse boxes are located on the Peugeot 607 and their corresponding diagrams, useful in case you need to check the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos