Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Radio from a Peugeot 208?

Model: Peugeot 208 UP, UW, UB, UJ, MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car stereo

See other generations:
Video tutorial

As shown in this tutorial, removing the car radio from a Peugeot 208 is an extremely simple and quick task. Before proceeding, ensure the key is not inserted for safety.

Start by unclipping the upper plastic panel, then unscrew the two screws beneath it and repeat the process for the lower side. Once done, unclip the display by pulling it firmly towards you. At this point, you can remove the last two screws, pull the car radio from its housing, and fit the replacement by following the reverse procedure.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to remove the car radio from the Peugeot 208
How to remove the car radio from the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Removing the radio from the Peugeot 208 model 1 is a simple and quick operation to be carried out independently. To perform this operation, we need t…
How to disassemble the standard radio of the Peugeot 208
How to disassemble the standard radio of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) The following steps will show us how to disassemble and replace the car radio and multimedia system of the Peugeot 208, as well as the 2008. First, w…
How to Replace the Standard Radio in the Peugeot 208
How to Replace the Standard Radio in the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) This guide explains how to remove and replace the standard radio in the Peugeot 208, following the instructions below. First, get inside the vehicle …

    Frequently Asked Questions

    • 208 2019-2026 - Why is the USB port not working in the Peugeot 208? Read answer
    • 208 2012-2019 - Why is the car radio of the Peugeot 208 not heard? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos