Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : Position and diagram of fuses for Peugeot Expert.

Peugeot Expert - Video tutorial

Model: Peugeot Expert Mark3, MK 3 - Years 2016-2024
Part: Fuse box
Operation: Position and diagram of fuses for Peugeot Expert.

Let's take a look in this guide at the positioning of the fuse boxes in the Peugeot Expert, also finding their diagram. First of all, we get on board the vehicle and start identifying the internal fuse box, which we find on the driver's side; we then remove the glove compartment, accessing the fuses that we find on the back, as shown in the video. At this point, we use the tweezers to remove and replace the damaged fuse with the new one; we find the external fuse box in the engine compartment, using the owner's manual for the fuse diagram!


Posted on 7 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Expert 2008-2016 - Where are the fuses located in the Peugeot Expert? Read Answer
    • Expert 2008-2016 - Where is the Peugeot Expert window lift fuse located? Read Answer
    • Expert 2008-2016 - What is the Peugeot Expert air conditioning fuse? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos