Do it yourself
| ||||
|
Peugeot 308 - Video tutorial
Model: Peugeot 308
T9, MK 2
- Years 2013-2021 To refill the additional AdBlue liquid on the Peugeot 308, you need to open the rear door to access the trunk. Here you need to remove the cover at the base of the trunk and then the one located at the bottom left of the spare tire: underneath it is the AdBlue tank cap. By unscrewing the cap and inserting a funnel inside, you can add the necessary amount of liquid to the tank. After refilling, you can close the cap and put the trunk covers back in place.
Posted on 24 June 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |