Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located just behind the centre console tunnel, but you access the air intake from the driver's side: the filter is practically next to the accelerator pedal. Start by removing the plastic cover on the side of the centre tunnel (you will also need to detach the cover underneath the dashboard) to then remove the lid of the filter container and extract the filter by pressing down the accelerator pedal.

Ensure there are no dirt residues inside the filter container and insert the new one (activated carbon filters are recommended).


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter in the Peugeot 508
How to replace the cabin air filter in the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) If you own a second-generation Peugeot 508 and need to replace the cabin air filter yourself, simply read the following guide and follow the entire p…
Where is the cabin filter of the Peugeot 508 located?
Where is the cabin filter of the Peugeot 508 located?
Peugeot 508 (2010-2018 / MK 1) The cabin air filter on a Peugeot 508 vehicle is located inside the vehicle's cabin. Specifically, the filter is installed under the central dashboar…
How to replace the air filter of the Peugeot 508
How to replace the air filter of the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) To replace the important air filter of your second edition Peugeot 508 on your own, you must read the following guide and follow all the steps descri…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos