Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Display of the Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Checks and maintenance

To remove the centre display of the Peugeot 207, leverage the lower part of the trim that surrounds the display and the air vents, so that it can be completely removed. This will allow you to loosen all the screws underneath, pulling out the air vents along with the display above them. The display can now be removed by disconnecting its connector at the back and detaching it from its housing. You can then insert the new replacement part, connecting and securing it properly.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Centre Tunnel of the Peugeot 207
How to Remove the Centre Tunnel of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Below are the instructions to remove and replace the centre tunnel of the Peugeot 207, following these simple steps. First, get inside the vehicle an…
How to remove the centre console of the Peugeot 207?
How to remove the centre console of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To remove the centre console of the Peugeot 207, detach the clips located at the base of the gear gaiter, as well as those securing the console at th…
How to Set the Clock on a Peugeot 207?
How to Set the Clock on a Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To adjust the clock on the Peugeot 207, turn on the instrument cluster to access the menu on the display at the centre of the dashboard: to access th…

    Frequently Asked Questions

    • 207 2006-2015 - Where is the inertia switch on the Peugeot 207? Read answer
    • 207 2006-2015 - Why does the Peugeot 207 give the message "auto-lock active" and does not start? Read answer
    • 207 2006-2015 - Where is the gear oil cap located in a Peugeot 207? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos