Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 408
    4. : Replacement of the internal ceiling lights of the Peugeot 408.

Peugeot 408 - Video tutorial

Model: Peugeot 408 P54 - Years 2022-2024
Part: Interior lights ceiling light bulb
Operation: Replacement of the internal ceiling lights of the Peugeot 408.

In case one of the lamps in the interior ceiling lights of the Peugeot 408 burns out, we proceed to replace them so as not to lose a useful source of illumination. Let's equip ourselves with a plastic lever, which will allow us to work without the risk of scratching the surfaces, with which we can lift the edge of the transparent cover of the ceiling light above the interior rearview mirror. Using our fingers, we finish removing it and we will have access to the lamps. We remove the burnt-out lamp and replace it with a new one, then we put the transparent cover back in its place. We use the same procedures if we need to replace the lamp in the ceiling light in the center of the roof.


Posted on 30 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos