Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Peugeot 306

Model: Peugeot 306 MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Door trim panel

Video tutorial

Today, follow these main instructions to remove and replace the front door panel of the Peugeot 306. First, open the front door and start by removing the triangular plastic cover, then the window switch panel by prying it from the sides and disconnecting the electrical connector located underneath.

Next, unscrew all the screws securing the door panel, as shown in the video.

At this point, detach the door panel from the sides until it is completely removed; finally, disconnect the handle cable!


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Peugeot 306
How to Remove the Door Panel on a Peugeot 306
Peugeot 306 (1993-2002 / MK 1) How do you remove the cover panel of the door? Let's see how to take off the door cover panel on a Peugeot 306. Remove the plastic covering around th…
How to Remove the Door Panel on a Peugeot 306?
How to Remove the Door Panel on a Peugeot 306?
Peugeot 306 (1993-2002 / MK 1) Removing the door panel on a Peugeot 306 is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, enter the cabi…
How to Remove the Door Panel on a Peugeot 306
How to Remove the Door Panel on a Peugeot 306
Peugeot 306 (1993-2002 / MK 1) How to remove the door panel on a Peugeot 306? Here’s how to disassemble the door panel. Unscrew the screws located in the internal handle on the doo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos