Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Peugeot 208?

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

The procedure to reset the service light on the Peugeot 208 involves holding down the SET button located in the centre of the instrument panel: while holding this button, insert the appropriate key into the ignition switch and turn it to activate the instrument panel.

This will trigger a countdown starting from ten, after which you can release the button: by doing this, you will notice that the service light has been completely reset, and you can then turn off the instrument panel.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Peugeot 208?
How to reset the "Service" light on a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) Good morning, today’s objective is to reset the "Service" light on your Peugeot 208. Before doing this, ensure that you have completed the service. S…
How to reset the "Service" indicator on a Peugeot 208?
How to reset the "Service" indicator on a Peugeot 208?
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) To reset the "Service" light on a Peugeot 208, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to acc…
How to reset the "Service" indicator on a Peugeot 208?
How to reset the "Service" indicator on a Peugeot 208?
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) To reset the "Service" light on a Peugeot 208, proceed by pressing and holding the button on the turn signal lever. While holding down this button, t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos