Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Cabin air filter replacement

Peugeot 406 - Video tutorial

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Cabin air filter
Operation: Cabin air filter replacement

The passenger compartment air filter is not located inside but on the outside of the car, exactly under the windshield, on the driver's side: in order to carry out maintenance and therefore replacement, the front hood must be opened and the gasket on the edge removed of the cover the plastic present just under the windscreen and therefore the cover itself to access the seat of the passenger compartment air filter; therefore remove the old filter, any residual dirt and insert the new one orienting it according to the direction of the air flow indicated by the arrows printed on the edge of the filter itself.


Posted on 8 September 2023 by ScegliAuto



Cabin air filter replacement
Peugeot 406 (1995-2005 / MK 1) The cabin air filter seat of the car model in question is located externally, immediately under the windscreen, on the passenger side; then open the
How to replace the cabin air filter of our car
Peugeot 406 (1995-2005 / MK 1) Replacing the filter is an operation that must be done periodically and is essential for the health of the driver and passengers as this filter allow
Oil and engine oil filter replacement, air, diesel and passenger compartment filter
Peugeot 406 (1995-2005 / MK 1) Open the front hood to make sure that it is supported safely. Unscrew the fixing nuts of the engine cover and remove it. Raise the car on suitable ca

Other guides that may interest you

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos