Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in Your Car

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Cabin air filter

Video tutorial

Replacing the filter is a task that should be done periodically and is essential for the health of the driver and passengers, as it filters the air effectively, reducing risks for allergy sufferers. You just need a good level of manual dexterity to avoid going to the mechanic.

The filter is located on the passenger side, beneath the glove compartment. Once you detach the relevant panel, remove it from its housing by taking it out of the box using a cross-head screwdriver to remove the screws.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Peugeot 406 (1995-2005 / MK 1) The cabin air filter housing for this car model is located externally, just below the windscreen, on the passenger side; therefore, open the front bo…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
Peugeot 406 (1995-2005 / MK 1) The cabin air filter is located outside the vehicle, directly under the windscreen, on the driver's side. To perform maintenance and replace it, open…
Oil and Oil Filter, Fuel Filter, and Cabin Filter Replacement
Oil and Oil Filter, Fuel Filter, and Cabin Filter Replacement
Peugeot 406 (1995-2005 / MK 1) Open the front bonnet and ensure it is securely supported. Unscrew the fastening nuts of the engine cover and remove it. Lift the vehicle on appropri…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos