Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Door trim panel

Below are the steps to remove the front door panel and speaker of the Peugeot 508. First, open the front door and start by removing the plastic cover of the handle; then unscrew the fixing screws found underneath, also removing those located on the sides of the panel, as illustrated in the video. At this point, remove the window switch and disconnect the electrical connector; pry on the sides of the panel until it detaches and remove it, following the video tutorial to the end for the removal of the speaker!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the door panel in the Peugeot 508?
How to disassemble the door panel in the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In this tutorial we can see how to remove the door panel in the Peugeot 508, a very simple and quick operation. First of all, we open the door on the…
How to Remove the Door Panel on the Peugeot 508?
How to Remove the Door Panel on the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) To remove the door panel on the Peugeot 508, use a tool to pry off the trim of the armrest: once this trim is removed, you will be able to locate all…
How to remove the door panel of the Peugeot 508
How to remove the door panel of the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) .. Today we will explain how to remove the door panel of the Peugeot 508, produced from 2010 to 2018. We open the door that needs.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos