Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Spoiler on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Body

See other generations:
Video tutorial

This video shows how to easily install a spoiler (for decorative purposes only) on your Peugeot 208. You can purchase this same part on AliExpress with the code 1005001691497940 or by searching for it in the Doctors Garage Store (on AliExpress, codes often change); this spoiler costs £99.87, but it will cost an additional £40.87 for shipping from Turkey.

As shown in the video, the installation is very simple.

Clean the bodywork thoroughly, then apply the appropriate adhesive and hold it firmly with masking tape until it adheres properly.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to Install Wind Deflectors on the Peugeot 208?
How to Install Wind Deflectors on the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To install the wind deflectors on the Peugeot 208, use a screwdriver to pry up the seal around the door glass. At the top right corner and the bottom…
How to Reset the Service Light on the Peugeot 208
How to Reset the Service Light on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) On the Peugeot 208, resetting the maintenance interval and oil light is done directly from the instrument cluster. With the Peugeot 208 stationary an…
How to Install Footwell Lights on a Peugeot 208
How to Install Footwell Lights on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In this video, you will see how to install footwell lights on a Peugeot 208: you will need to remove the panel under the steering wheel. Inside, you …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos