Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the fuse boxes in the Peugeot 308 MK1

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Fuse box

In this video, we can see where the fuse boxes are located in the Peugeot 308 MK1; in left-hand drive vehicles, the box is found between the steering column and the driver's door, in a small compartment below the dashboard. In right-hand drive vehicles, it is in the same place, but located behind the glove compartment. In this box, you will find the fuse for the cigarette lighter - which is also a power socket - and it is F9. In the engine bay, there is a second box on the left side of the battery, while the main fuses are physically located above the battery.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses for the lights of the Peugeot 308 located?
Where are the fuses for the lights of the Peugeot 308 located?
Peugeot 308 (2007-2014 / T7, MK 1) We need to point out that the video here shows a fuse diagram that is identical to that of the Peugeot 308 and not only, in fact it can be considered…
Where are the fuses located in the Peugeot 308?
Where are the fuses located in the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) The fuses of the Peugeot 308 are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of car, it is possible t…
Where is the Fuse Box of the Peugeot 308?
Where is the Fuse Box of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) The Peugeot 308, produced from 2007 to 2014, contains two fuse boxes. The first fuse box is located under the bonnet; specifically, it is next to the…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos