Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Peugeot 3008?

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Fuse box

In this video, we can see the location of the fuse boxes of the Peugeot 3008 and their respective diagrams, to consult in case we need to check the fuse of a malfunctioning device. As shown, we find the first box inside the cabin, precisely in the lower area of the dashboard on the driver's side. The second box is instead located inside the engine compartment, to the right of the battery and protected by the black plastic cover. In case of a damaged fuse, make sure to use a replacement of equivalent specifications and operate with the vehicle turned off.

Posted on 4 December 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Peugeot 3008 located?
Where is the fuse box of the Peugeot 3008 located?
Peugeot 3008 (2009-2016 / MK 1, T84) Inside the Peugeot 3008, two fuse boxes are installed. The first fuse box is located inside the front hood, specifically between the engine and the b…
Where are the fuses located in the Peugeot 3008?
Where are the fuses located in the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) In the Peugeot 3008, each fuse is located inside one of the designated fuse boxes present in the vehicle: there are two, one located inside the cabin…
Where are the fuses located in the Peugeot 3008?
Where are the fuses located in the Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) Each of the fuse boxes installed on board the Peugeot 3008 performs the task of containing all the fuses that regulate the operation of the devices i…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos