Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot 1007?

Model: Peugeot 1007 MK 1 - Years 2005-2010
Part: Service warning light

To reset the service light on a Peugeot 1007, press and hold the button located on the right side of the instrument cluster while it is off; continue holding the button while inserting the ignition key into the corresponding ignition switch. Then, turn the key to switch on the instrument cluster: you will notice a countdown starting from ten. At the end of the countdown, the service light will be reset.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the sliding door of the Peugeot 1007?
How do you reset the sliding door of the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) When problems related to the operation of the sliding door occur on the Peugeot 1007, it is possible that the vehicle's battery is not sufficiently c…
How to Replace the Cabin Filter on the Peugeot 1007
How to Replace the Cabin Filter on the Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) In this guide for your Peugeot 1007, you will discover where the cabin air filter is located and how to replace it quickly and safely. First, turn of…
Oil Change Reset on Peugeot 1007
Oil Change Reset on Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) In this very short tutorial video today, we will see the entire operation, step by step, to reset the oil change light on a Peugeot 1007, a model pro…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos