Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse diagram for the Peugeot 208?

Model: Peugeot 208 UB, UJ, UP, MK 2, UW - Years 2019-2026
Part: Fuse box

If a device in your Peugeot 208 has suddenly stopped working, the first thing to do is check the status of the relevant fuses, the diagrams for which are shown in this video. Locate the first fuse box inside the cabin, behind the small door in the dashboard on the driver's side. The second box is in the engine compartment, protected by the black plastic cover on the same side. Ensure you replace any blown fuses with equivalents, otherwise, you may damage the connected devices.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Location and Diagram for the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Today, we will look at the positioning and diagram of the fuse boxes for the Peugeot 208, following the instructions below. First, get inside the veh…
Diagram and Location of the External Fuse Box of the Peugeot 208
Diagram and Location of the External Fuse Box of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Today, we will discover the instructions that will allow you to access the external fuse box of the Peugeot 208, along with the diagram and layout. F…
What is the Fuse Diagram for the Peugeot 208?
What is the Fuse Diagram for the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) Your Peugeot 208 has two fuse boxes. The first is located under the steering column, covered by a plastic panel; removing it will reveal the primary …

Other guides you may be interested in

    Frequently Asked Questions

    • 208 2012-2019 - Where is the Peugeot 208 fan fuse located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos