Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Peugeot 108?

Model: Peugeot 108 MK 1 - Years 2014-2021
Part:

In this tutorial, you will learn how to reset the tyre warning light on the Peugeot 108. This operation is extremely simple and quick, and should be done only after restoring the correct pressure in each tyre according to the instructions in the manual. Start by entering the vehicle, then insert the key and turn on the ignition. Next, open the passenger glove compartment, locate the indicated button, and hold it down until the light stops flashing. Restart the vehicle to check that the reset has been successful.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Peugeot 108?
How to Reset the Tyre Pressure Warning Light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure warning light on the Peugeot 108, open the glove compartment located on the passenger side. Once opened, locate the button…
How to reset the tire pressure warning light in the Peugeot 108?
How to reset the tire pressure warning light in the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) In this tutorial we can see how to reset the tire pressure warning light in the Peugeot 108, a very simple and quick operation. Before proceeding, we…
How to Reset the Tyre Pressure Warning Light on a Peugeot 108?
How to Reset the Tyre Pressure Warning Light on a Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure warning light on a Peugeot 108, first inflate the tyres to the optimal pressure indicated on the sticker affixed to the dr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos