Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : How to replace the battery of the Peugeot 508.

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Battery
Operation: How to replace the battery of the Peugeot 508.

If the battery of your Peugeot 508 first series (year 2010-2018) discharges too quickly due to many years of use and you want to replace it yourself, then all you have to do is carefully read the following guide and follow the following steps. First of all, turn off the car and open the front hood. At this point, locate the battery on the lower right side of the engine compartment and disconnect both terminals. Once this is done, unscrew the safety screws and remove the battery. Finally, install the new one and reconnect the two terminals correctly.


Posted on 4 February 2024 by ScegliAuto

    Frequently Asked Questions

    • 508 2010-2018 - How much does it cost to replace the battery of the Peugeot 508? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos