Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Dipped Beam Bulbs in the Peugeot 407?

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Headlight bulb

In this tutorial, you will see how to replace the dipped beam bulbs in the Peugeot 407, a very simple and quick operation. First, ensure that the key is not in the ignition for safety. Then, open the bonnet, locate the cap at the back of the headlamp, and remove it. Next, disconnect the power connector, unclip the metal clip, and extract the bulb from the housing. At this point, simply insert the replacement bulb, avoiding direct contact with the glass using bare hands, and follow the reverse procedure.

Updated on 14 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Dipped Headlight Bulb in a Peugeot 407?
How to Replace the Dipped Headlight Bulb in a Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) The dipped headlight bulb in the Peugeot 407, like in all other vehicles, has an H1 fitting. When purchasing it, be careful not to confuse it with th…
How to Replace the Interior Light Bulb in a Peugeot 407
How to Replace the Interior Light Bulb in a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Briefly, here are the instructions to remove and replace the light bulbs in the interior light of a Peugeot 407. First, get inside the cabin and pry …
Where Are the Fuses in the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) The fuses in the Peugeot 407 are contained within the dedicated fuse boxes installed in the vehicle: this model has two boxes. The first is located i…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos