Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Driver's Door Panel in the Peugeot Boxer Van?

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the driver's door panel in the Peugeot Boxer van, a very simple and quick operation. First, open the door in question, then unclip the cover located in the upper outer corner and unscrew the newly exposed screw.

Next, remove the cap located inside the opening handle, unscrew the additional screw, and proceed by extracting the window control console. At this point, simply remove the speaker cover, unscrew all remaining fixing screws, and separate the panel from the door.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Remove the Wing Mirror on a Peugeot Boxer Van?
Peugeot Boxer (2006-2024 / MK 2) This tutorial shows how to remove the external rear-view mirror on a Peugeot Boxer van, and potentially replace it. For this simple and quick operati…
How to Remove the Rear Bumper on the Peugeot Boxer Van
How to Remove the Rear Bumper on the Peugeot Boxer Van
Peugeot Boxer (2006-2024 / MK 2) As shown in this tutorial, removing the rear bumper on the Peugeot Boxer van is a straightforward and quick operation. First, fully open the two rear…
How to Reset the Service Light on a Peugeot Boxer Van
How to Reset the Service Light on a Peugeot Boxer Van
Peugeot Boxer (2006-2024 / MK 2) In this tutorial, see how to reset the service light on a Peugeot Boxer van, a very simple and quick operation to perform only after completing all s…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos