Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Car Radio in a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Car stereo

Installing a new car radio in a Peugeot 208 is a very simple task that can be done independently. Before installing the new radio, remove the old one by using a lever tool to pry open the plastic around the radio. Once the screen is removed, disconnect the two connectors on the sides. Next, remove the screws located behind the screen to take off the cover of the previous radio's wiring. This will allow you to completely remove the screen and body of the radio. Now take the new radio body and start connecting it to the vehicle. Connect the connectors first, as shown in the video, and then insert the screen by clipping it into the dashboard.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Car Radio on Peugeot 208
Replacing the Car Radio on Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Want to replace the non-original car radio in your Peugeot 208? Here’s how to remove the radio from the central dashboard. Insert the keys into the h…
How do you reset the radio of the Peugeot 208?
How do you reset the radio of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In order to reset the radio of the Peugeot 208, you need to remove the dashboard panel located in the bottom left part compared to the steering colum…
How to Remove the Radio from a Peugeot 208
How to Remove the Radio from a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) To remove the radio from a Peugeot 208, get inside the vehicle and start by removing the trim surrounding the unit, using a plastic tool to pry along…

Other guides you may be interested in

    Frequently Asked Questions

    • 208 2019-2026 - Why is the USB port not working in the Peugeot 208? Read answer
    • 208 2012-2019 - Why doesn't the Peugeot 208 car radio receive the channels? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos