Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the audible signal of the seat belts of the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Checks and maintenance

Disconnecting the audible signal of the seat belts on a Peugeot 308 vehicle is a fairly simple operation to perform independently. To carry out this operation, we need to remove the rear seats of the car and remove the locking hooks. Once removed, we can remove the lower cover of the cabin in order to unhook the plastic cover and insert a flat-tipped screwdriver into the connector and disconnect it. Once disconnected, we can reassemble everything and test to ensure that the audible signal has been deactivated correctly. To reconnect everything, you will need to perform the reverse procedure.

Posted on 16 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate the seat belt warning beep of the Peugeot 308?
How do you deactivate the seat belt warning beep of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) In order to deactivate the seat belt buzzer of the Peugeot 308, you need to loosen the screws that fix the front seats to their housing, so that they…
How to Top Up the AdBlue Fluid on a Peugeot 308
How to Top Up the AdBlue Fluid on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Before you can start, open the boot lid of your Peugeot 308. First, unclip and remove the lower boot floor. Then, unscrew the AdBlue refill cap. Once…
Changing the Battery on a Peugeot 308
Changing the Battery on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Need to change the battery on a Peugeot 308? Remove the battery if it is damaged. Open the car door and pull up the lever to open the engine compartm…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - Why is the Peugeot 308 not connecting to Bluetooth? Read answer

How to reset the tyre pressure warning light on the Dacia Sandero?

To reset the tyre pressure warning light on the Dacia Sandero, inflate all the tyres to the pressure indicated on the label on the driver's door. Once the tyres are inflated, turn on the ignition and navigate through the menu using the controls on the right side of the steering wheel. Scroll with the arrows to find the tyre pressure option: by holding down the OK button located on the right side of the steering wheel, you can reset the warning light.

Watch the video!


by ScegliAuto

More videos