Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator of the Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Radiator

See other generations:
Video tutorial

Today's instructions will show you the steps to remove and replace the engine cooling radiator of the Peugeot 508. First, open the engine bonnet of the vehicle and start by disconnecting the coolant pipe, draining the fluid into a container for about ten minutes; then disconnect the electrical connector of the coolant temperature sensor and remove the retaining clips along with the screws to take out the fan, as shown in the video.

At this point, remove and replace the radiator with the new one, as well as with the original.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Where are the Fuses Located on the Peugeot 508?
Where are the Fuses Located on the Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) The fuse boxes on the Peugeot 508 contain the fuses that control the operation of the devices installed on the vehicle: in this type of vehicle, you …
How to Disable the "Eco" Mode on a Peugeot 508?
How to Disable the "Eco" Mode on a Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) Good morning, today’s goal is to permanently disable the "Eco" mode on your Peugeot 508. Start by turning on the vehicle using the ignition button lo…
Where is the OBD Port on a Peugeot 508?
Where is the OBD Port on a Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) If you want to locate the OBD port inside your second-generation Peugeot 508, follow these simple steps. First, get into the car and ensure it is com…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos