Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the key on Peugeot 3008

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Key

Thanks to this very short tutorial, we can see how to reset the key of a Peugeot 3008, second generation model. Therefore, the operation is very simple as shown in today's video, and we can do it independently and in just a few seconds, let's see how to proceed immediately. First, insert the ignition key and turn on the car's dashboard without starting the engine, then press and hold one of the three buttons on the key for at least ten seconds. After that, turn off the dashboard, remove the key, and finally test the correct functioning.

Posted on 12 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset Tyre Pressure on a Peugeot 3008
How to Reset Tyre Pressure on a Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) In this useful tutorial, see the procedure needed to reset the tyre pressure on a Peugeot 3008, second series model produced from 2016 onwards. First…
How to reset the service indicator on the Peugeot 3008
How to reset the service indicator on the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) The instructions in this guide will show us how to reset the service maintenance reminder of the Peugeot 3008. First, we get on board the cabin and s…
How to reset the tire pressure warning on the Peugeot 3008
How to reset the tire pressure warning on the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) These short and simple instructions will show us how to reset the tire pressure warning (TPMS) of the Peugeot 3008; before performing the reset, it i…

Other guides you may be interested in

    Frequently Asked Questions

    • 3008 2016-2023 - What does the red warning light on the Peugeot 3008 wrench indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos