Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can replace the starter motor on the Piaggio Vespa PX 125 by loosening the screws that secure the panel of the fairing located near the rear wheel, on the right side of the scooter: underneath, you will find the primary gear and the starter motor that engages directly with it. You can then unscrew the screws that secure the motor to its housing in order to disconnect the connectors attached to the device: at this point, you will be able to position the new replacement part and check its operation.

Posted on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 In today's tutorial, you will see the procedure for removing and replacing the rear wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 an…
How do you replace the ignition switch of the Piaggio Vespa PX 125?
How do you replace the ignition switch of the Piaggio Vespa PX 125?
Vespa Px 125 In order to replace the ignition switch of the Piaggio Vespa PX 125, you need to remove the panel located on the front internal part of the motorcycl…
How to Replace the Front Shock Absorber on a Piaggio Vespa PX 125
How to Replace the Front Shock Absorber on a Piaggio Vespa PX 125
Vespa Px 125 To replace the front shock absorber on a Piaggio Vespa PX 125, loosen the nuts that secure the pin located at the bottom of the shock absorber, near …

How to Change the Engine Oil in a Royal Enfield 500?

In this tutorial, you will learn how to change the engine oil in a Royal Enfield 500, an extremely simple and quick operation to be performed every 12 months. First, ensure that the engine is cold, then place a container underneath and, using a 10mm socket, unscrew the two bolts related to the drain holes. Once the oil has drained from the system, open the filter cap using the same socket, insert the replacement, and reassemble everything in reverse order. Finally, pour in new 15W50 oil through the upper hole.

Watch the video!


by ScegliAuto

More videos