Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Boxster
    4. : 2005-2011 (MK 2, 987)

Porsche Boxster Years 2005-2011 (MK 2, 987)

Porsche Boxster (2005-2011 / MK 2, 987)
Where are the fuses located in the Porsche Boxster?
Any fuse of the Porsche Boxster is located inside the only fuse box that is present on the vehicle: this will be located in the lower left part of the …read all…
Posted on 18 May 2024 by ScegliAuto
Porsche Boxster (2005-2011 / MK 2, 987)
Where is the OBD port of the Porsche Boxster 2
If you need to connect a professional diagnostic tool to your Porsche Boxster Mk2 (year 2005-2011), but you do not know where the appropriate OBD port is …read all…
Posted on 5 October 2022 by ScegliAuto
Porsche Boxster (2005-2011 / MK 2, 987)
How to access the engine compartment on Porsche Boxster
Unfortunately on the Porsche Boxster, accessing the engine compartment does not consist of the simple process of raising the hood. To begin, lift the rear hood …read all…
Posted on 3 February 2024 by ScegliAuto
Porsche Boxster (2005-2011 / MK 2, 987)
How to open the front hood of a Porsche Boxster with a flat battery
Before we can begin, we will have to fully rotate the front wheels of our Porsche Boxster to the left. So let's start by unscrewing and removing the screws and …read all…
Posted on 29 January 2024 by ScegliAuto
Porsche Boxster (2005-2011 / MK 2, 987)
How to open the front hood on a Porsche Boxter
Let's see in this video how to open the front hood on a Porsche Boxter. Take the remote control key and press the opening button (located above the control …read all…
Posted on 25 November 2023 by ScegliAuto
Loudspeaker (1) Battery (2) Arm (1) Soft top (1) Bodywork (1) Timing belt (1) Checks and maintenance (4) Dashboard (2) Headlight (3) Tail light (1) Air filter (3) Accessory Kit (1) Headlight bulb (1) Engine (1) Starter motor (1) Engine oil (1) Rear bumper (1) Brake pads (1) Hydraulic pistons (1) Fuel pump (2) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (1) Steering wheel (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos