Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster / Speedometer on a Porsche 993

Model: Porsche Porsche Various
Part: Instrument cluster

In this short video, see how to remove the instrument cluster or speedometer and tachometer on a Porsche 993 in simple steps. First, get inside the vehicle and use a very thin plastic lever; then start by removing the speedometer, prying at the sides and disconnecting the cable at the back: repeat the same procedure for the other two indicators. At this point, the video shows the disassembly and restoration of the speedometer, step by step; for reassembly, simply apply the reverse procedure!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Spark Plugs and Leads of the Porsche 993
Replacing the Spark Plugs and Leads of the Porsche 993
Porsche Porsche Various This guide provides the main instructions for removing and replacing the spark plugs along with the wiring of the Porsche 993. In this case, the spar…
Removing Instrument Cluster from Porsche 996
Removing Instrument Cluster from Porsche 996
Porsche Porsche Various Let's see how to remove the instrument cluster from the Porsche 996. Use a lever to remove the plastic caps located at the sides of the instrument cl…
How to adjust the clock on the onboard computer of the 2014 Porsche
How to adjust the clock on the onboard computer of the 2014 Porsche
Porsche Porsche Various Today we will explain how to adjust the clock of the on-board computer of a 2014 Porsche vehicle independently with simple and quick steps. To carry …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos