Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : How to remove the soft top on the Porsche 911 (996)

Porsche 911 - Video tutorial

Model: Porsche 911 996 - Years 1997-2005
Part: Soft top
Operation: How to remove the soft top on the Porsche 911 (996)

In this video tutorial we will see how to remove the soft top on the Porsche 911 (996), following the instructions below. First of all, let's get on board the car and start by removing the plastic cover that we find near the ceiling light of the passenger compartment; then we remove the other plastic covers, which we find on the rear corners, as shown in the video. At this point we unscrew the two fixing bolts of the hood, in order to be removed from the outside; then let's go and put the two plastic caps back on. Reverse the procedure for reassembly!


Posted on 22 February 2024 by ScegliAuto



How to replace the arms of the convertible top of the Porsche 911
Porsche 911 (1997-2005 / 996) Today we will see the main steps that will allow us to disassemble and replace the arms of the Porsche 911 hood, following the instructions below. Fi
How to replace the key battery of a Porsche 911
Porsche 911 (1997-2005 / 996) Let's start by inserting the tip of a small slotted screwdriver inside the key of our Porsche 911, and then leverage. By doing so, we will have reach
How do you remove the convertible top of the Porsche 911?
Porsche 911 (1997-2005 / 996) In order to replace the hood of the Porsche 911, it must be lifted so that you can access its internal part: in this way it will be possible to go an

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos