Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on a Porsche Cayenne

Model: Porsche Cayenne MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

Today, you will learn how to remove and replace the headlight bulb on a first-generation Porsche Cayenne. First, open and lift the hood of your vehicle; then, remove the top protective cap by pressing on the sides, and use a Torx wrench to unscrew the screw located inside.

At this point, gently pull out the headlight and disconnect its electrical connector at the back; open the bulb protection cover to access it and replace it with the correct new one, disconnecting it from the connector as shown in the video!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight of a Porsche Cayenne
How to Remove the Front Headlight of a Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) Before starting, open the hood of your Porsche Cayenne. Begin by prying off and removing the bolt cover that secures the headlight to the frame. Next…
Replacing the Front Fog Light Bulb on the Porsche Cayenne MK1
Replacing the Front Fog Light Bulb on the Porsche Cayenne MK1
Porsche Cayenne (2003-2010 / MK 1) In today's tutorial video, you will learn how to remove and replace the front fog light bulb on the first generation Porsche Cayenne, following these…
How to Remove the Front Headlight of the Porsche Cayenne?
How to Remove the Front Headlight of the Porsche Cayenne?
Porsche Cayenne (2010-2017 / MK 2) To remove the front headlight of the Porsche Cayenne, use the tool kit located in the trunk of the vehicle. Using the wrenches in the kit, loosen the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos