Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the RAM 1500?

Model: RAM 1500 MK 5, DT - Years 2019-2026
Part: Service warning light

To reset the Service light of the RAM 1500, you will need to turn on the instrument panel by inserting the ignition key into the corresponding slot: once the panel is turned on, you can navigate through the menu using the arrow buttons on the left side of the steering wheel. When the voice with the remaining oil life is displayed, you can press and hold the OK button to reset the remaining life; once the operation is complete, you can release the button and turn off the panel.

Posted on 22 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the RAM 1500
How to reset the service light on the RAM 1500
RAM 1500 (2009-2019 / MK 4, DJ, DS) Today's steps will allow us to reset the service light for the regular maintenance of the engine oil change on the RAM 1500. First, we get into the c…
How to reset the AdBlue warning light in the RAM 1500 pick-up truck?
How to reset the AdBlue warning light in the RAM 1500 pick-up truck?
RAM 1500 (2019-2026 / MK 5, DT) If the AdBlue warning light has come on in the instrument panel of our RAM 1500 pick-up truck, it means that the liquid in the anti-pollution system …
How to reset the RAM 1500 oil warning light
How to reset the RAM 1500 oil warning light
RAM 1500 (2009-2019 / MK 4, DJ, DS) The maintenance warning light serves as a reminder of the need to carry out routine maintenance on your car. Many times it can happen that this warni…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos