Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the RAM Promaster?

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Service warning light

It will be possible to reset the Service light that is shown on the instrument panel of the RAM Promaster by inserting the ignition key into the ignition switch so that the instrument panel lights up: once the panel is turned on, it will be possible to press the accelerator pedal three times in a row in order to then turn off the panel. Once this has been turned off, it will be possible to turn it back on again after a few seconds: by doing this, it will be possible to verify that the Service light has completely disappeared from the instrument panel of the vehicle.

Posted on 17 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the RAM Promaster?
How do you reset the Service light on the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) To reset the Service light that appears on the instrument panel of the RAM Promaster, you need to insert the ignition key into the ignition switch an…
How to Reset the Service Light on a RAM Promaster?
How to Reset the Service Light on a RAM Promaster?
RAM Promaster (2014-2022 / MK 1) You can completely clear the Service light displayed on the dashboard of the RAM Promaster by inserting the ignition key into the ignition switch and…
How do you reset the Service light on the RAM Promaster?
How do you reset the Service light on the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) To reset the Service light on the RAM Promaster, you need to insert the ignition key and turn it to start the instrument panel: once the panel is on,…

Other guides you may be interested in

How to Remove the Fuel Pump on Toyota Verso

Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal panel with paper or an absorbent cloth, then, using a screwdriver and hammer, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation tubes. Extract the fuel pump. To reassemble, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos