Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery on the RAM 1500 MK4

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part: Battery

Let's see in this short video the main steps to disassemble and replace the battery of the RAM 1500 fourth series, following the instructions below. First of all we open the bonnet and start by disconnecting the battery terminals (positive and negative pole), using a 10 mm socket wrench; after which we use the same key to unscrew the fixing bracket screw, in order to lift and remove the battery from the battery holder. At this point we replace the battery with the new one, of the right type, having the same amperage and the same starting current!

Posted on 28 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery on the Dodge Ram 1500 MK4
How to replace the battery on the Dodge Ram 1500 MK4
RAM 1500 (2009-2019 / DS, MK 4, DJ) In this short and simple guide we will see how to remove and replace the battery of the Dodge Ram 1500, fourth generation. First we open the engine h…
How to replace the battery of a 2012 RAM 1500.
How to replace the battery of a 2012 RAM 1500.
RAM 1500 (2009-2019 / DS, MK 4, DJ) If you own a fourth-generation RAM 1500 (year 2012) and need to replace the vehicle's battery on your own, simply follow the steps described below. F…
How to replace the battery of the key for the RAM 1500.
How to replace the battery of the key for the RAM 1500.
RAM 1500 (2009-2019 / DS, MK 4, DJ) If you want to replace the battery of the key for your RAM 1500 Mk4 (year 2009-2019) but don't know how to do it, don't worry because in the followin…

Other guides you may be interested in

How to Replace the Fuel Pump on an Opel Corsa C

Usually, upon the first ignition of the dashboard, a sound similar to a spray can be heard from the rear of the cabin: this is the fuel pump pressurising the system and preparing to supply fuel to the engine for ignition; if this sound is not heard, start by checking the integrity of the relevant power fuse, and if it is intact, verify that voltage reaches the power connector; if current is present, you can also try powering the pump directly to confirm it is faulty; replacing it is very simple, just disconnect the connector and hoses, then unclip the retaining ring and remove it to replace it with a new one.

Watch the video!


by ScegliAuto

More videos