Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel in the RAM 2500 pick-up?

Model: RAM 2500 MK 5, DT - Years 2019-2026
Part: Door trim panel

In this video we can see how to remove the door panel in the RAM 2500 pick-up. It is a very simple operation, we need a flat tip screwdriver, a star tip screwdriver and a Torx T15 wrench. Let's start by unscrewing the 6 screws placed along the perimeter of the panel, remove the small panel placed inside the opening handle and unscrew the 2 screws below it. At this point, we also remove the internal mirror cover and disengage the panel from the door, pulling it towards us and at the same time upwards. Finally we disconnect the rear connectors and the lock rope.

Posted on 5 January 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote control battery of the RAM 2500 pick-up?
How to replace the remote control battery of the RAM 2500 pick-up?
RAM 2500 (2019-2026 / MK 5, DT) In this tutorial we can see how to replace the remote control battery in the RAM 2500 pick-up. For this quick and easy operation we will need a small…
How to replace the remote control battery of the RAM 2500 pick-up?
How to replace the remote control battery of the RAM 2500 pick-up?
RAM 2500 (2009-2019 / MK 4, DS, DJ, D2) In this tutorial we can see how to replace the remote control battery of the RAM 2500 pick-up, a very simple and fast operation. To do this, besides …
How to replace the air filter in the RAM 2500 pick-up?
How to replace the air filter in the RAM 2500 pick-up?
RAM 2500 (2009-2019 / MK 4, DS, DJ, D2) As we can see in this tutorial, replacing the air filter in the RAM 2500 pick-up is a very quick and easy operation. After getting the right replacem…

How to Remove the Cabin Filter from a Nissan Juke

In this video, let’s see how to remove the cabin air filter from a Nissan Juke. Open the glove compartment and unclip the end stop arms. Then, use a screwdriver to remove the securing screws. After completing the previous steps, unscrew the side screws in the glove compartment and remove the plastic cover. Unscrew the screws again, and after disconnecting the power cables, pull the glove compartment away from the dashboard. Then, slide the air filter out of its housing as shown in the video. Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos