Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the injectors on the Dodge RAM 1500?

Model: RAM 1500 DH, MK 3, DR, D1, DM, DC - Years 2002-2009
Part: Fuel injectors

To be able to replace the injectors of the Dodge RAM 1500 you have to open the hood to have access to the side parts of the engine block: the injectors will in fact be positioned on both sides. On the right side, simply disconnect the coils connected to the injectors so that they can then be extracted from the housings. On the left side it will be necessary to first remove the air filter box and only then will it be possible to disconnect the coils and then remove the injectors. Once they have been removed, the new spare parts can be inserted and all the removed components can be mounted.

Posted on 27 January 2022 by ScegliAuto

Video tutorial

Related tutorials

Replace the starter motor on the Dodge RAM 1500
Replace the starter motor on the Dodge RAM 1500
RAM 1500 (1994-2001 / MK 2, BR, BE) Let's replace the starter motor of the Dodge RAM 1500 together, following the instructions below. First of all we open the bonnet and we go to discon…
Diagram of the fuse box of the 2003 Dodge Ram 1500.
Diagram of the fuse box of the 2003 Dodge Ram 1500.
RAM 1500 (2002-2009 / DH, MK 3, DR, D1, DM, DC) This video shows the location of the fuse boxes in the 2003 Dodge Ram 1500. In addition to the fuse box locations, the video also shows a diagram of …
How to reset the multimedia system of the Dodge RAM 1500
How to reset the multimedia system of the Dodge RAM 1500
RAM 1500 (2019-2026 / MK 5, DT) Today's steps will show us the process of resetting the factory radio and multimedia system of the Dodge RAM 1500. First, we get on board the vehicle…

Other guides you may be interested in

Removing the Rear Door Panel of the Punto Evo

Here’s how to remove the rear door panel: gently pull the window lift lever and detach the metal clip holding it in place using a flathead screwdriver; once removed, take off the plastic cap behind the door opening lever and unscrew the hex screw inside, along with the two screws located under the panel handle as shown in the video. After removing the two cross-head screws under the door panel, you can detach it from the door using two levers to extract the plastic clips (taking care not to break them). Once the panel is separated, disconnect the wire that operates the door opening lever by detaching it from its housing as demonstrated in the video. After completing the necessary operation (in the video, the window lifter was being fixed), proceed in reverse order to reposition the panel, close it, and secure it.

Watch the video!


by ScegliAuto

More videos