Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front brake pads of the Dodge RAM 2500 MK4

Model: RAM 2500 MK 4, DS, DJ, D2 - Years 2009-2019
Part: Brake pads

Let's see in this short guide how to remove and replace the front brake pads of the Dodge RAM 2500, fourth series, in simple and quick steps. First of all we lift the car and remove the front wheel; then unscrew the rear fixing screws of the brake caliper, using a socket wrench, as shown in the video. At this point we remove the caliper and replace the old brake pads; clean up the dirt from the caliper and leverage the piston to make it re-enter. We just have to insert the new pads and reassemble everything!

Posted on 28 January 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the brake pads on the Dodge RAM 2500
How to replace the brake pads on the Dodge RAM 2500
RAM 2500 (2009-2019 / MK 4, DS, DJ, D2) We see in this guide the procedure necessary for the disassembly and replacement of the front and rear brake pads of the Dodge RAM 2500. First we lif…
How to change the brake discs and pads of the Dodge RAM 2500
How to change the brake discs and pads of the Dodge RAM 2500
RAM 2500 (2009-2019 / MK 4, DS, DJ, D2) In today's video we will see the main steps that will allow us to remove and replace the front brake pads and discs of the Dodge RAM 2500. First of a…
Replace the front brake pads of the Ram 2500 MK4
RAM 2500 (2009-2019 / MK 4, DS, DJ, D2) Let's see in this video how to remove and replace the front brake pads of the Ram 2500 fourth series, in simple steps. First we lift the car with the…

Other guides you may be interested in

How to Remove the Handbrake Button on a VW Passat

Have you encountered problems with the electric handbrake button on your Passat? Here’s how to proceed with the disassembly and reassembly of the part. Open the inspection compartment at the bottom left of the dashboard. Reach in and locate the handbrake button (from the inside of the dashboard). Press the button until it comes out of its housing, then disconnect the button from the power cable. Install the new handbrake button: first connect the plug to the button, then insert it into the dashboard housing. Finally, test the correct operation of the brake.

Watch the video!


by ScegliAuto

More videos