Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the wiper blades on the RAM 1500?

Model: RAM 1500 MK 5, DT - Years 2019-2026
Part: Windshield wipers

In order to replace the RAM 1500 wiper blades, the arm must be raised so that the blade is not in direct contact with the windshield. At this point, by tilting the brush with respect to the arm, it will be necessary to hold the joint pin of the two pieces with one finger and slide the brush downwards with the other hand. Once the old brush has been removed, it will be possible to insert the new one and carry out the same operation on the other side as well. When both brushes have been installed, it will be necessary to check that they are working correctly.

Posted on 20 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the wiper motor on the RAM 1500?
How do you replace the wiper motor on the RAM 1500?
RAM 1500 (2002-2009 / D1, DC, DH, DR, DM, MK 3) The replacement of the wiper motor on the RAM 1500 is carried out by opening the hood, so that the two side screws that fix the grille at the base of…
Diagram of the fuse box of the 2003 Dodge Ram 1500.
Diagram of the fuse box of the 2003 Dodge Ram 1500.
RAM 1500 (2002-2009 / D1, DC, DH, DR, DM, MK 3) This video shows the location of the fuse boxes in the 2003 Dodge Ram 1500. In addition to the fuse box locations, the video also shows a diagram of …
How to replace the battery of a 2012 RAM 1500.
How to replace the battery of a 2012 RAM 1500.
RAM 1500 (2009-2019 / DS, MK 4, DJ) If you own a fourth-generation RAM 1500 (year 2012) and need to replace the vehicle's battery on your own, simply follow the steps described below. F…

How to Remove the Stereo from a Hyundai i20

Want to remove the stereo from your Hyundai but don’t know how? In this video, see how to remove the original stereo from your car. First, remove the dashboard cover plastics using a plastic tool, then detach the central frame of the stereo (where the air vents are located) along with the related clips of the control buttons. Once the stereo is free from constraints, unscrew the fastening screws on its sides. Pull the stereo out by hand and disconnect the cables (power and antenna). To reassemble, proceed in reverse.

Watch the video!


by ScegliAuto

More videos